| 1 |
Suryansh Mohanty (2025-2026) |
Detached Eddy Simulations of Leading-Edge Sweeping Jet Film Cooling: The Effect of Inflow Turbulence |
| 2 |
Vigneshwaran S. (2024-25) |
Design of Mixed Flow Compressor for Rotating Detonation Engine |
| 3 |
Priti Saha (2024-25) |
Design of Supersonic Bladeless Turbine for Rotating Detonation Engine Applications |
| 4 |
Raja Heeralal Jena (2023-24) |
CFD Study of Tip Clearance Flow in a Low-Speed Tandem-Bladed Axial Flow Compressor |
| 5 |
Harsh Raj (2023-24) |
Design of Dual Mode Micro Gas Turbine: Compressor |
| 6 |
Pawan (2023-2024) |
Investigations on effect of an array of sweeping jets |
| 7 |
Surendra Kolhe (2023-24) |
Design of Dual Mode Micro Gas Turbine: Turbine |
| 8 |
Goutam Mondal (2021-2022) |
Parametric Study of DCA Airfoil using MISES and Blade Parametrization |
| 9 |
Jitendra Pradhan (July 2020- November2020) |
Numerical Study on Effect of Tip Clearance of Contra Rotating Fan. |
| 10 |
Mridupaban Das (July 2020- November2020) |
Design Strategies for Distortion in Tolerant Contra Rotating Fan Stage. |
| 11 |
Suboth Ranjan (2018-19) |
Lox Pump Design |
| 12 |
Kaviya Swaminathan (2018-19) |
Parametric Study for Adoption of Variable Cycle Engine Concept for Low Bypass Ratio Turbofan Engine |
| 13 |
Tuhin Bandopadhyay (2018-2019) |
Characterization and Mitigation of Boundary Layer in Convergent Flow Passage |
| 4 |
Suraj Singh (2017-18) |
Study on Optimization of Diffuser Duct Length for Aircraft Intake |
| 15 |
Gourav Tayal (2017-19) |
Calibration of Multi-hole Pressure Probes |
| 16 |
B K Vibhava (2017-18) |
Study on Commercial Aircraft Intake Design |
| 17 |
Sumit Sarkar (2017-18) |
Study on Passive Flow Control Through Rectangular Diffuser Duct |
| 1 |
Vigneshwaran S. (2025-26) (DD) |
Design of Mixed Flow Compressor for Rotating Detonation Engine |
| 2 |
Priti Saha (2025-26) (DD) |
Role of Shock Boundary Layer Interaction on Understanding of Supersonic Guide Vane Passage |
| 3 |
Anubhav Mohanty (2025-26) |
Numerical Investigation on Performance Improvement Strategies on Centrifugal Compressor |
| 4 |
Pawan (2024-2025) (DD) |
Effect of Inflow Turbulence on Heat Transfer Augmentation with Multihole Sweeping Jet Film Cooling |
| 5 |
Surendra Kolhe (2024-25) (DD) |
Aerodynamic Design of Axial Flow Turbine for Micro-Gas Turbine in UAV Applications |
| 6 |
Harsh Raj (2024-25) (DD) |
Design of Mixed Flow Compressor and Cross-Over Diffuser for Micro-Gas Turbines in UAV Applications |
| 7 |
Raja Heeralal Jena (2024-25) (DD- Mechanical) |
CFD Study of Shrouding and Partial Shrouding in Tandem Bladed Axial Flow Compressor |
| 8 |
Thuniki Shrenith Suhas (2024-25) |
Aero-Thermal Investigation and Endwall Cooling Study of High Pressure Nozzle Guide Vane |
| 9 |
Mandar Salunkhe (2024-25) |
Numerical Study on Effect of Penny Shaped Variable Stator Vanes on Performance of Tandem Bladed Axial Compressor Stage |
| 10 |
Shiva Kumar (2023-24) |
Experimental Investigations on the Effect of Axial Spacing & Speed Combinations of Contra-Rotating Axial-Centrifugal Compressor[CRAC] Stage Performance |
| 11 |
Durvasula Sai Bhaskara Rama Sarma (2023-24) |
Calibration of Five-Hole Probes for Tip Clearance Flow Investigation in Variable Area Nozzle Vanes |
| 12 |
Goutam Mondal (2022-2023) (DD) |
Effect of Pivot-Shape Modification on Part Clearance Flow Field in Variable Area Turbine Nozzle Vane |
| 13 |
Manideep Pasupula (2022-2023) (DD) |
Aerodynamic Design Aspects for Small-Size Transonic Contra-Rotating Fan Stage |
| 14 |
Jegadeeshwaran J(2022-23) |
Effect of Head Geometry and Reynolds number on Calibration of Five-hole Probes. |
| 15 |
Priyanka S. (2022-2023) |
Non-Axisymmetric Stator Hub Endwall Contouring for Tandem Bladed Axial Compressor Stage |
| 16 |
Drik Sarkar (2022-23) (DD-Mechanical) |
Characteristics of Laminar Separation Bubble With Varying Leading-Edge Shapes and Deflections of the Trailing-Edge Flap |
| 17 |
Boby Tyagi (2012-22) |
Numerical Study on Design Aspects of the Tandem Stator for Highly Loaded Low-Speed Axial Flow Compressor. |
| 18 |
Yadagini Nirmal (2021-22) |
Numerical Study on Application of Splitter Stator for Tandem Bladed Axial Flow Compressor. |
| 19 |
Tuhin Bandopadhyay (2019-20) (DD) |
Characterisation of Boundary Layer under Zero Pressure Gradient [ Received Best MT Project Award in convocation-2021] |
| 20 |
Kaviya Swaminathan (2019-20) (DD) |
MTP on “ Design of Small Size Centrifugal Compressors of Pressure Ratio 2.6 and 4.5” |
| 21 |
Suboth Ranjan (2019-20) (DD) |
Numerical Investigation on Performance of Centrifugal Pump for Liquid Propellant Rocket Engine” |
| 22 |
Shivkumar Maurya (2020-21) |
Numerical Investigations on Effects of Endwall Contouring for LP Turbine Linear Cascade. |
| 23 |
Rather Laasani Sanya (2020-21) |
Numerical Study on Design Aspects of Pipe Diffuser for Low Speed Centrifugal Compressor |
| 24 |
Bhanu Pratap (2020-21) |
Numerical Investigations on Application of Cantilever Stator on Aerodynamic Performance of Tandem Bladed Axial-Flow Compressor. |
| 25 |
Brijesh Modi (2020-21) |
Numerical Investigations on LP Turbine Nozzle Blade to Minimize the Tip Clearance Losses. |
| 26 |
Jaffar (2019-2020) |
Aerodynamic Design and Computational Analysis of a Transonic Contra-Rotating Axial Flow Compressor Stage. |
| 27 |
Akshay Gelam (2019-2020) |
Numerical and Experimental Investigations on Effect of Tip Clearance in LP Turbine Linear Cascade. |
| 28 |
Rajeshree Singh (2018-19) |
Aerodynamic Design of Small Capacity Horizontal Axis Contra Rotating Wind Turbine. |
| 29 |
Mohitkumar (2018-19) |
Study the Effect of Tip Clearance on Flow Field for Turbine Nozzle Vane. |
| 30 |
Supen Sah (2016-17) |
Structural and Vibration Analysis of High Aspect ratio Low Speed Contra-Rotating Stage. |
| 31 |
Anand darji (2015-2016) |
Numerical Studies to understand Rotor-Stator Axial Gap on the Performance of Transonic Axial Flow Compressor Stage Coupled with Circumferential Grooved Casing Treatmen |
| Guided with Dr. Dilip Alone, NAL, Bangalore |
| 32 |
Jefferey Savio Joseph (2015-16) |
Performance Characterizations of a High Speed Axial Flow Compressor Stage Implemented with Diverse Porosities of Axial Slotted Casing Treatment. |
| Guided with Dr. Dilip Alone, NAL , Bangalore |
| 33 |
Antony John(2015-16) |
Aerodynamic Design and Numerical Analysis of Low Speed partial Tandem Bladed Axial Flow Compressor |
| 34 |
Nikul Patel () |
Design of centrifugal pump |
